Asphalt Binder Analyser

To be confirmed by email: 0.00 Previous Next

Product code: TAS-0039
Standards: ASTM D6307-98; AASHTO T308-99; BS 12697-39:2004. Add To Quote

Asphalt Binder Analyser

DescriptionKey FeaturesSpecificationsDatasheet Once the test has commenced, the door is automatically locked for the entire period of the test and the extraction fan is automatically started. Average test times range from 20 minutes for 6mm samples, to 45 minutes for a 40mm sample. During the test, the integral dot matrix display shows the asphalt sample […]
Quote: Asphalt Binder Analyser 1

Asphalt Binder Analyser

To be confirmed by email: 0.00

DescriptionKey FeaturesSpecificationsDatasheet Once the test has commenced, the door is automatically locked for the entire period of the test and the extraction fan is automatically started. Average test times range from 20 minutes for 6mm samples, to 45 minutes for a 40mm sample. During the test, the integral dot matrix display shows the asphalt sample weight to a display accuracy of 0.1g, the...

Once the test has commenced, the door is automatically locked for the entire period of the test and the extraction fan is automatically started. Average test times range from 20 minutes for 6mm samples, to 45 minutes for a 40mm sample. During the test, the integral dot matrix display shows the asphalt sample weight to a display accuracy of 0.1g, the present weight loss (both in grams and as a %), the rate of change of sample weight and also the duration of the test. This unique display gives an immediate indication of the progress of the test. The binder content, percentage weight loss and calibration factor are measured to 0.01%.

  • At the end of the test, which is signalled by an audible alarm, the display changes to clearly show the binder content of the sample, the door is unlocked and the results are printed. A choice of printouts is available; either as a final end of test analysis or as a continuous print-out showing results every minute including a final end of test analysis. Additional print outs can be requested at the end of the test for permanent records of test documentation.
  • The final printed test results include the furnace set temperature, sample weight, final weight, weight loss in grams and percentage weight loss, calibration factor, test run time, the time and date.

 


The asphalt binder analyser is fully compliant with the latest standards, these include:

  • EN 12697-39
  • AASHTO TP53
  • ASTMD630

All of these standards specify the equipment and procedures needed to determine the asphalt binder content of hot mix asphalt / bituminous mixtures by the loss on ignition method.
This method replaces the traditional solvent procedure and thereby not only avoids the health and environmental concerns associated with chlorinated solvents, but also the related expense of such chemicals.
The asphalt binder analyser combines a sophisticated furnace and weighing system to continuously measure the weight loss of a bituminous mixture during combustion, and automatically calculates its binder content at the end of the test.

  • Independently controlled afterburner
  • Double skin construction
Dimensions mm700 x 1000 x 1280
Maximum power (KW)4.5
Weight (kg)125

Download


To access the datasheet pdf, enter your details below.

Your Name*

Your Email*

Telephone*

Company*

Country*