Find us on Google+

Hydraulic Standard Roller Compactor Dual Size

To be confirmed by email: 0.00 Previous Next

Product code: CRT-RC-H2
Standard: EN 12697-33 Steel roller. Add To Quote

Hydraulic Standard Roller Compactor Dual Size

DescriptionKey FeaturesSpecificationsAccessoriesDatasheet The Roller Compactor is considered to be the method of laboratory specimen compaction that results in slabs of asphaltic paving materials with properties that most closely simulate those of materials in the highway. Slabs can be compacted to target mixture densities using loads that are equivalent to those of full-scale compaction equipment. The […]
Quote: Hydraulic Standard Roller Compactor Dual Size 1

Hydraulic Standard Roller Compactor Dual Size

To be confirmed by email: 0.00

DescriptionKey FeaturesSpecificationsAccessoriesDatasheet The Roller Compactor is considered to be the method of laboratory specimen compaction that results in slabs of asphaltic paving materials with properties that most closely simulate those of materials in the highway. Slabs can be compacted to target mixture densities using loads that are equivalent to those of full-scale compaction equipment. The CRT-RC-H2 is hydraulically powered and controlled by a programmable logic controller (PLC) connected to an HMI which the operator can use to select the number of passes. A manual pressure control is adjusted to set the required load. Its main function is to produce slabs for wheel tracking tests. Users have compacted hot asphaltic materials over stress absorbing membrane interlayers (SAMIs) on a base of cracked concrete in order to assess the effectiveness of the SAMI by using shear or bending tests. Steel wheeled roller segmentsSolid machine frameOptional heated head for reducing mixture sticking to roller during compactionModel for compaction of 305 x 305mm and 305 x 400mm slabsSlab depth from 40 to 135 mmRoller compactor moulds will fit Cooper Technology Wheel trackers so that compacted slabs can be wheel-tracked without de-mouldingMaximum compaction load of 30kN per 305mm roll width (equivalent to largest on-site static rollers)Speed controlHMI for operator selection of number of passesSlabs can be used as wheel-tracking specimens, and cored to make indirect tensile test specimens or cut into beams for 4 Point Bending TestVibrating roller option with adjustable frequency to simulate on-site vibratory rollersCE marked Maximum Roller Load30kN over 305 mm roll widthTrolley Travel±150 mm or ±200 mmSpeedVariable up to 10 cycles per minuteSlab Thickness mm40-135Electrical Supply220–240 Volts 50 Hz @ 16A (others available)Dimension mm (WxDxH)600 x 1450 x 1900Working space required mm (WxDxH)1600 x 1700 x 2000Estimated Weight Kg270PCNot Required Accessories are not included in the price of the main device and may be purchased separately if required.CRT-RC-HHHeated head option to avoid sticky mixtures to impact on compaction resultsCRT-RC-HVIBVibration option to simulate conditions in-situCRT-WTRCM-50Steel and aluminium quick release mould for roller compactor or wheel tracker, 305 x 305 x 50mm deepCRT-WTRCM-100Steel and aluminium quick release mould for roller compactor or wheel tracker, 305 x 305 x 100mm deepCRT-RCM-50WSteel and aluminium quick release mould for roller compactor or wheel tracker, 305 x 400 x 50mm deepCRT-RCM-100WSteel and aluminium quick release mould for roller compactor or wheel tracker, 305 x 400 x 100mm deep Download To access the datasheet pdf, enter your...

The Roller Compactor is considered to be the method of laboratory specimen compaction that results in slabs of asphaltic paving materials with properties that most closely simulate those of materials in the highway. Slabs can be compacted to target mixture densities using loads that are equivalent to those of full-scale compaction equipment.
The CRT-RC-H2 is hydraulically powered and controlled by a programmable logic controller (PLC) connected to an HMI which the operator can use to select the number of passes. A manual pressure control is adjusted to set the required load.
Its main function is to produce slabs for wheel tracking tests. Users have compacted hot asphaltic materials over stress absorbing membrane interlayers (SAMIs) on a base of cracked concrete in order to assess the effectiveness of the SAMI by using shear or bending tests.

  • Steel wheeled roller segments
  • Solid machine frame
  • Optional heated head for reducing mixture sticking to roller during compaction
  • Model for compaction of 305 x 305mm and 305 x 400mm slabs
  • Slab depth from 40 to 135 mm
  • Roller compactor moulds will fit Cooper Technology Wheel trackers so that compacted slabs can be wheel-tracked without de-moulding
  • Maximum compaction load of 30kN per 305mm roll width (equivalent to largest on-site static rollers)
  • Speed control
  • HMI for operator selection of number of passes
  • Slabs can be used as wheel-tracking specimens, and cored to make indirect tensile test specimens or cut into beams for 4 Point Bending Test
  • Vibrating roller option with adjustable frequency to simulate on-site vibratory rollers
  • CE marked
Maximum Roller Load30kN over 305 mm roll width
Trolley Travel±150 mm or ±200 mm
SpeedVariable up to 10 cycles per minute
Slab Thickness mm40-135
Electrical Supply220–240 Volts 50 Hz @ 16A (others available)
Dimension mm (WxDxH)600 x 1450 x 1900
Working space required mm (WxDxH)1600 x 1700 x 2000
Estimated Weight Kg270
PCNot Required

Accessories are not included in the price of the main device and may be purchased separately if required.

CRT-RC-HHHeated head option to avoid sticky mixtures to impact on compaction results
CRT-RC-HVIBVibration option to simulate conditions in-situ
CRT-WTRCM-50Steel and aluminium quick release mould for roller compactor or wheel tracker,
305 x 305 x 50mm deep
CRT-WTRCM-100Steel and aluminium quick release mould for roller compactor or wheel tracker,
305 x 305 x 100mm deep
CRT-RCM-50WSteel and aluminium quick release mould for roller compactor or wheel tracker,
305 x 400 x 50mm deep
CRT-RCM-100WSteel and aluminium quick release mould for roller compactor or wheel tracker,
305 x 400 x 100mm deep

Download


To access the datasheet pdf, enter your details below.

Your Name*

Your Email*

Telephone*

Company*

Country*