Find us on Google+

Automatic Compression and Flexure Test Machine

To be confirmed by email: 0.00 Previous Next

Product codes: TCM-6431, TCM-6432
Standards: EN 196-1; ASTM C109. Add To Quote

Automatic Compression and Flexure Test Machine

DescriptionKey FeaturesSoftwareSpecificationsAccessoriesDatasheet Fully Automatic cement compression machine has been designed according to the EN 196-1 and ASTM C109 standards for testing the flexure of the mortar prisms 40x40x160 mm and the compression on the 40x40mm pieces of prisms after the flexure test or 50 x50 mm mortar cubes.The machine is consist of very rigid two […]
Quote: Full Automatic Cement Compression and Flexure Test Machine 1

Automatic Compression and Flexure Test Machine

To be confirmed by email: 0.00

DescriptionKey FeaturesSoftwareSpecificationsAccessoriesDatasheet Fully Automatic cement compression machine has been designed according to the EN 196-1 and ASTM C109 standards for testing the flexure of the mortar prisms 40x40x160 mm and the compression on the 40x40mm pieces of prisms after the flexure test or 50 x50 mm mortar cubes.The machine is consist of very rigid two column frame with double test chamber, automatic closed loop controlled hydraulic power pack and LCD graphic digital control and readout unit.Power PackDual stage power pack which is controlled by BC 100 is designed to supply required oil to the frames. Very silent power pack can load a specimen between 1 kN/ sec to 20 kN/sec. On the dual stage pump high delivery low pressure pump is used for rapid approach and low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading.The main characteristics are:Dual stage pump750 W power25 litre oil capacity60-100 mm/min fast approach speedOn both frames the load is measured by load cell to get accurate test results. Both test chambers are supplied complete with round compression platens of 165 mm diameter with 245 mm vertical daylight.Wide range of materials, such as bricks, resins, soil cement mixtures, rocks, micro-cores can be tested by using suitable accessory. The machine is supplied complete with safety doors.The machine is supplied less jig assemblies; suitable jigs should be ordered according to the required test standard. 15kN Flexure250kN CompressionCompression & Flexure Jigs for both EN & ASTMSupplied with safety doorSoftware Included LCD graphics data acquisition and controls system BC100 is designed to control the machine and processing of data from load cells or pressure transducers installed on the compression machine frame. The easy to read LCD graphic display and touch-button data pad keys make the unit quick and straight forward to operate. All interactions with the measuring system are via the front control panel by using simple menu-driven procedures.The BC100 is contained in light alloy housing and its design satisfies the ergonomic requirements for various use. The BC100 digital graphic display allows real time load vs time graph. At the end of the test cycle, the results can be stored in the large memory or downloaded to a PC in excel format. Dedicated software package is available for further online data processing, database management and certificate printing.The main characteristics are:High resolution 65.000 points240*120...

Fully Automatic cement compression machine has been designed according to the EN 196-1 and ASTM C109 standards for testing the flexure of the mortar prisms 40x40x160 mm and the compression on the 40x40mm pieces of prisms after the flexure test or 50 x50 mm mortar cubes.
The machine is consist of very rigid two column frame with double test chamber, automatic closed loop controlled hydraulic power pack and LCD graphic digital control and readout unit.

Power Pack

Dual stage power pack which is controlled by BC 100 is designed to supply required oil to the frames. Very silent power pack can load a specimen between 1 kN/ sec to 20 kN/sec. On the dual stage pump high delivery low pressure pump is used for rapid approach and low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading.
The main characteristics are:

  • Dual stage pump
  • 750 W power
  • 25 litre oil capacity
  • 60-100 mm/min fast approach speed


On both frames the load is measured by load cell to get accurate test results. Both test chambers are supplied complete with round compression platens of 165 mm diameter with 245 mm vertical daylight.

Wide range of materials, such as bricks, resins, soil cement mixtures, rocks, micro-cores can be tested by using suitable accessory. The machine is supplied complete with safety doors.
The machine is supplied less jig assemblies; suitable jigs should be ordered according to the required test standard.

  • 15kN Flexure
  • 250kN Compression
  • Compression & Flexure Jigs for both EN & ASTM
  • Supplied with safety door
  • Software Included

LCD graphics data acquisition and controls system BC100 is designed to control the machine and processing of data from load cells or pressure transducers installed on the compression machine frame. The easy to read LCD graphic display and touch-button data pad keys make the unit quick and straight forward to operate. All interactions with the measuring system are via the front control panel by using simple menu-driven procedures.
The BC100 is contained in light alloy housing and its design satisfies the ergonomic requirements for various use. The BC100 digital graphic display allows real time load vs time graph. At the end of the test cycle, the results can be stored in the large memory or downloaded to a PC in excel format. Dedicated software package is available for further online data processing, database management and certificate printing.
The main characteristics are:

  • High resolution 65.000 points
  • 240*120 pixel blue-white graphic LCD display
  • Standalone full automatic testing capacity
  • CPU card by microprocessor 32 bit ARM risk architecture
  • Can make manual tests if required
  • Large permanent memory up to 256 test results
  • RS232C (optional Ethernet) connection at 57600 band
  • One RS232 serial port for connecting either
  • PC or printer for data transmission
  • Two analogical channels, use for Load Cell or pressure transducer
  • A sample type and dimensions can be entered respect to the standards
  • 18 key touch membrane keyboard
  • Easy to operate with 6 main function keys
  • Language select; English
  • Can control two frames
SpecificationsFlexureCompression
Capacity kN15kN250kN
Accuracy 1% from kN2kN to 15kN25kN to 250kN
Resolution kN0.01kN0.1 kN
Platen Dimensions mm165165
Ram Travel50mm50mm
Max. Vertical Daylight mm245mm245mm
Power W0.750.75
Overall Dimensions (wxdxh) mm500x1030x1600500x1030x1600
Weight Kg250250

Accessories are not included in the price of the main device and may be purchased separately if required.

TCM-0021/ACompression Jig Assembly for 50mm Cubes
TCM-0020/AFlexure Jig Assembly with distance between lower bearers of 119mm
TCM-0021/ECompression Jig Assembly for 40x40x160mm portions
TCM-0020/EFlexure Jig Assembly with distance between lower bearers of 100mm
TCM-0092 40x40x160mm Three Gang Prism Mould
TCM-0093Feed Hopper for Three Gang Prism Mould
TCM-009550x50x50mm Three Gang Mould 

Download


To access the datasheet pdf, enter your details below.

Your Name*

Your Email*

Telephone*

Company*

Country*