Automatic Power Pack with Proportional Valve for 2 Frames

To be confirmed by email: 0.00 Previous Next

Product codes: TC-4850, TC-4850/110
Add To Quote

Automatic Power Pack with Proportional Valve for 2 Frames

DescriptionKey FeaturesSoftwareSpecificationsDatasheet TC-4850 and TC-4860 Automatic Power Packs with Proportional Valve, are advanced flexible power packs can be used on any testing system ideal for R&D laboratories, universities for advanced tests with P.I.D.Closed loop control. It can perform tests under load and displacement controls. The frequency of the P.I.D controller and data acquisition is 1000 […]
Quote: Automatic Power Pack with Proportional Valve for 2 Frames 1

Automatic Power Pack with Proportional Valve for 2 Frames

To be confirmed by email: 0.00

DescriptionKey FeaturesSoftwareSpecificationsDatasheet TC-4850 and TC-4860 Automatic Power Packs with Proportional Valve, are advanced flexible power packs can be used on any testing system ideal for R&D laboratories, universities for advanced tests with P.I.D.Closed loop control. It can perform tests under load and displacement controls. The frequency of the P.I.D controller and data...

TC-4850 and TC-4860 Automatic Power Packs with Proportional Valve, are advanced flexible power packs can be used on any testing system ideal for R&D laboratories, universities for advanced tests with P.I.D.
Closed loop control. It can perform tests under load and displacement controls. The frequency of the P.I.D controller and data acquisition is 1000 Hz. TC 4850 and 4860 Automatic power packs are designed to supply required oil to the load frames for loading, unloading or low cycle fatigue testing. All the operations of Data Acquisition and Controls System can be controlled from the touch screen front panel of a 240x320 LCD display or computer.
TC-4850 can control up to 2 different frames. For each frame there is one load cell (or pressure transducer) input and one displacement transducer input for control. There are extra 4 analogue channels for other sensors such as Load Cells, Pressure Transducers, LVDT’s, strain gauges, etc. built in the system.
TC 4860 can control up to 4 different frames. For each frame there is one load cell (or pressure transducer) input and one displacement transducer input for control. There are extra 8 analogue channels for other sensors such as Load Cells, Pressure Transducers, LVDT’s, strain gauges, etc. built in the system. The power pack automatically controls and supplies oil to the frame which is chosen by the user via the touch screen LCD digital control unit or by choosing the test type from the computer software.
The type of displacement transducer can be TTL or analogue (It must be same type for all frames). The maximum oil flow is 2 litres/minute at 300 bars. Both power packs can be used for loading-unloading and keeping the samples under constant load (pressure with 0.03 bar error). Accuracy of the system is 0.03 bars. Minimum controllable pressure is 3.5 bars. Both power packs can be connected to the computer through Ethernet port for advanced test cycles, data acquisition and reporting. The modulus of elasticity, Poisson’s Ratio and compressibility parameters is easily and properly evaluated by attaching strain gauges or extensometers on to the sample. All the calibration values of the transducers and also all the test parameters for the last test is automatically stored on the control unit. Both power packs incorporate a pressure safety valve for each frame separately and cooling unit. 220-240V, 50 Hz, 1ph.

  • 8 analogue channels for different frame load cells, pressure transducers, LVDT’s, strain gauges, etc. built in the system.
  • Instrumentation amplifiers for sensor excitation and amplification
  • 65.000 resolution and 1.000 Hz control for each channel
  • Ethernet port for connecting to computer
  • 240x320 pixel LCD display
  • Touch screen operator panel
  • 6 main function keys
  • Can control: 2 frames (TC-4850) and 4 frames (TC-4860)
  • Can execute load or displacement control tests
  • PC software for test control and advanced report printout

The Automatic Compression machine can be controlled by a computer with the software supplied by Test International. The software provides data acquisition and management for compression, flexure and splitting tensile test throughout the test Execution. The software is capable of running the machine in load control or displacement control. Engineering functions of elasticity modulus, Poisson ratio, yield value and energy is automatically calculated.
Online speed or mode change is available by user-friendly buttons. Various types of graphs respect to used sensors can be monitored during the test. The advanced functions for data base management provide an easy navigation of all saved data. The test results certificate includes all descriptive information. Therefore, test parameters can be set and details about the test carried out such as names of the firms and laboratories, test type, specimen type, user info and other information required can be entered and printed out as well as test report and graph.
Also, all minor revisions can be implemented upon request.

Power in Volts220
Weight Kg170
Dimensions (lxwxh) mm900 x 550 x 1050

Download


To access the datasheet pdf, enter your details below.

Your Name*

Your Email*

Telephone*

Company*

Country*