Find us on Google+

Front Loading Oedometer – Consolidation

To be confirmed by email: 0.00 Previous Next

Product code: TS-0300
Standards: BS 1377:5; ASTM D2435; ASTM D3877; ASTM D4546; AASHTO T216. Add To Quote

Front Loading Oedometer – Consolidation

DescriptionKey FeaturesModels available AccessoriesDatasheet The One-dimensional Consolidation test is used to determine the consolidation characteristics of soils of low permeability.The consolidation is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a yoke assembly and one of three alternative beam ratios as 9:1 – 10:1 and 11:1. The […]
Quote: Front Loading Oedometer - Consolidation 1

Front Loading Oedometer – Consolidation

To be confirmed by email: 0.00

DescriptionKey FeaturesModels available AccessoriesDatasheet The One-dimensional Consolidation test is used to determine the consolidation characteristics of soils of low permeability.The consolidation is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a yoke assembly and one of three alternative beam ratios as 9:1 – 10:1 and 11:1. The beam is fitted with a counter balance weight and beam support check. The cell platform will accept the complete range  Test International consolidation cells and is fitted with a central spigot to ensure accurate centering of the cell under the loading yoke.The fixed ring consolidation cells are manufactured from corrosion-resistant materials and conform to the requirements of the relevant standards. An integral water reservoir is incorporated in the cell which allows the specimen to be inundated with water when required. All cells are supplied complete with upper and lower porous disc, pressure pad and cutting (specimen) ring.Consolidation cell, dial gauge and weights have to be ordered separately. Rigid Construction9:1, 10:1 & 11:1 Ratios3 Cell sizes availableAccurate Centering  TS-0307TS-0309TS-0311ApplicationHigh PressureASTMBS/ENSpecimen dia.50 mm63.5mm75 mmSpecimen area1963 mm²4.909 inch²4418 mm²Beam ratio10:110:19:1Load1 kg1.55 kg1 kgStress50 kPa1000 lbf/ft²20 kPaTypical max stress8 MPa103 200 lbf/ft²3.2 MPaStress for 1 kg50 kPa645 lbf/ ft²20 kPa Accessories are not included in the price of the main device and may be purchased separately if required.TS-0348Set of weights (6x10 kg, 2x5 kg, 3x2 kg,2x1kg,3x0.5Kg,2x0.25kg)TS-0302Floor-mounting standTGM-0152Dial Gauge 12mm x 0.001mm (Digital)TGM-0122Dial Gauge 10mm x 0.01mm Download To access the datasheet pdf, enter your details below. Your Name* Your Email* Telephone* Company* Country*...

The One-dimensional Consolidation test is used to determine the consolidation characteristics of soils of low permeability.
The consolidation is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a yoke assembly and one of three alternative beam ratios as 9:1 – 10:1 and 11:1. The beam is fitted with a counter balance weight and beam support check. The cell platform will accept the complete range  Test International consolidation cells and is fitted with a central spigot to ensure accurate centering of the cell under the loading yoke.
The fixed ring consolidation cells are manufactured from corrosion-resistant materials and conform to the requirements of the relevant standards. An integral water reservoir is incorporated in the cell which allows the specimen to be inundated with water when required. All cells are supplied complete with upper and lower porous disc, pressure pad and cutting (specimen) ring.
Consolidation cell, dial gauge and weights have to be ordered separately.

  • Rigid Construction
  • 9:1, 10:1 & 11:1 Ratios
  • 3 Cell sizes available
  • Accurate Centering
 TS-0307TS-0309TS-0311
ApplicationHigh PressureASTMBS/EN
Specimen dia.50 mm63.5mm75 mm
Specimen area1963 mm²4.909 inch²4418 mm²
Beam ratio10:110:19:1
Load1 kg1.55 kg1 kg
Stress50 kPa1000 lbf/ft²20 kPa
Typical max stress8 MPa103 200 lbf/ft²3.2 MPa
Stress for 1 kg50 kPa645 lbf/ ft²20 kPa

Accessories are not included in the price of the main device and may be purchased separately if required.

TS-0348Set of weights (6x10 kg, 2x5 kg, 3x2 kg,2x1kg,3x0.5Kg,2x0.25kg)
TS-0302Floor-mounting stand
TGM-0152Dial Gauge 12mm x 0.001mm (Digital)
TGM-0122Dial Gauge 10mm x 0.01mm

Download


To access the datasheet pdf, enter your details below.

Your Name*

Your Email*

Telephone*

Company*

Country*